stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Witt on November 29, 2009, 05:40:29 PM

Title: CC Logging Data Sequence
Post by: John Witt on November 29, 2009, 05:40:29 PM

Hi all,

Does anyone know how the ICE data logger sequences its data acquisition. If you start with the log cleared, does it write until full then stop accepting new data, or will it overwrite previous data each time the ESC is initialized. I made a small prop change, but can't tell whether I'm looking at that effect. It appears to have written until full, then stopped, but I'm not sure.  n~

Thanks,

John W

Title: Re: CC Logging Data Sequence
Post by: Alan Hahn on November 29, 2009, 06:03:58 PM

It sounds like it stops from this post (owner of CC)

http://www.rcgroups.com/forums/showpost.php?p=12965934&postcount=8

Title: Re: CC Logging Data Sequence
Post by: Alan Hahn on November 29, 2009, 06:23:59 PM

oops, it might depend on whether you are running the latest version of the software or not.

Here is a link to what I think is the latest version of the Firmware.  Note the second bullet.

http://www.castlecreations.com/downloads/frh-phoenix.html

Title: Re: CC Logging Data Sequence
Post by: John Witt on November 29, 2009, 07:34:23 PM

Thanks,

I think it stops collecting. I have firmware V2.16 in the ICE.

I would have cleared it; I took the laptop to the field but forgot the data cable -- falls in the "it's always something" category.  HB~>

John W