stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: Crist Rigotti on November 12, 2009, 08:58:46 PM
-
Just noticed that CC has just released v3.22 for their CastleLink and v3.0 for the Phoenix. Stay tuned.
-
I wait with bated breath. (it would be baited breath, but I don't care for sardines anyway.) n~
Dean P.
-
Gentleman,
It looks like Castle has done their homework. Very little difference between v3.13/v2.13 and the latest v3.22/v3.0.
As a reminder each version was bench tested on my Resolve EP using a 10x7 APCE cut down from 11 inches. I find that this prop comes very close to the same load while flying. Both versions were run using the same set up. Apples to apples, just 1 month apart. Also the temp for the ESC on v3.13 may be a little low from actual. Not much tough.
V3.13/v2.13
Battery temp - 120
Motor temp - 122
ESC temp - 97
Mah used - 2422
Amps ave - 23.32
Min Volts - 13.83
V3.22/v3.0
Battery temp - 123
Motor temp - 122
ESC temp - 104
Mah used - 2465
Amps ave - 23.91
Min Volts - 13.76
-
Crist,
Was the ESC a Phoenix 45?
Alan
-
Alan,
Yes the ESC was a Phoenix 45.
-
Crist,
Looking at the CC web site it indicates that they added a "Punch Control" for acceleration, could we somehow use this to give the little pop out of a corner?
Best, DennisT
-
Crist,
Looking at the CC web site it indicates that they added a "Punch Control" for acceleration, could we somehow use this to give the little pop out of a corner?
Best, DennisT
The best to know is to fly it and see. Not much flying going on around here.