front
What I did was to epoxy 1mm carbon fiber plates front and back of the China ply mount and use large area flat washers on the bolts.
JohnAll you need to know is under the arf section about the sv 11 jim
Motor is Cobra C3520/14 KV=700Batter is ProLite TP2800 - 6SPH25Prop is my own design 12.5 x 5.5 CF three bladeHow does it fly? It doesn't fly the way I would want a plane to fly in a serious competition. It's just too heavy, in fact with max length .018" lines and a prop with a little less pitch I was cramped for battery usage even with a 6 cell. I made a few changes and the power system is happy now with beaucoup power to pull the weight. It doesn't fly bad and I enjoy flying it but it's no scratch built Thundergazer.Motorman