John,
Thanks for the info. Could you post their website so when it is in stock, we can get them.

Best,   DennisT

https://rcdude.com/arming-switch-with-deans.html?srsltid=AfmBOoqxLymiUlHMa-e2nQldAl2-7hYgLtNGwYfGpNGEQPio_mfRkPFU

Sent from my SM-A146U using Tapatalk

Thanks to John for posting!

I was chatting with John about his new e-Vector when he told me about the MPI issue.  When they say things like “having a problem with supplier” I figured that was a “pearl clutching” moment!  I was hoping that if John posted there might lead others to post possible supply links, thanks to those who have posted here.

I use the MPI units everywhere. I have a couple new ones on hand, plus my local Hobby shop usually has them in stock.  I do not (yet) plan on going into hoarder mode - honest!  All seriousness aside this is not a crisis issue, if we can solder up LiIons then new arming switches should not be a game breaker, right?  It’s just that I am perfectly happy. BUYING a ready to use component instead of dabbing one.

Per John, the Innov8tive unit was a 1-piece mounting flange that does NOT mechanically lock the connector body in place, you need a couple drops of CA.  Probably still OK…

I use XT60 wall mount connector to make an arming plug
Wall mount:

https://www.ebay.com/itm/274460971348?_skw=XT60+Connector&itmmeta=01JR9XDCF57TSNKRATTSEV59TE&hash=item3fe7261154:g:zt4AAOSwSp5fOGpz&itmprp=enc%3AAQAKAAAA8FkggFvd1GGDu0w3yXCmi1c7C1lYKfuLAnqiP6JqmnmvDoa68qaHCa68jPsPzePx543gyHXHkKQhO6a9ExELVM3VRMhVR1MXISOS4%2FFZ9Z5bTAHNfA0GwH7fZgjZZ5I0wE%2FcGVh22NsP%2Fn4iBijkEC33689AMsBKGM%2BRUR9ARpH2os%2BhOdzZrpQNek%2BhtX0iErBJtv5KlMv6hcAh063Zl7ITsD7rUxEpuKp9STSICRzl1tKQQUJ75T5WmXbolSGCM9bgHxF6LX8z9ezjl7qro7aIhmz4hXSX%2FEqIfHqRF4vBuny6VsA0I4ZH%2Fq6Zgt8uCw%3D%3D%7Ctkp%3ABFBM4Me1vcJl

Of course you need the mate.  I mount the mate on a piece of thread. It never gets lost.