stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: petermick on January 13, 2018, 02:17:25 PM

Title: Another question for Christ Rigotti
Post by: petermick on January 13, 2018, 02:17:25 PM
Hi Christ,
On your Thunderbolt profile it appears that you are using 4-40 bolts placed thru the front motor mount and into the Cobra motor. What are the bolts screwed into? It appears that the bolts are going directly into the motor.  Is this correct or am I missing something?

Thanks

Peter Mick
Title: Re: Another question for Christ Rigotti
Post by: John Cralley on January 13, 2018, 04:54:09 PM
I don't know what the screws are but they aren't 4 - 40. They will be metric if they go into the motor.
Title: Re: Another question for Christ Rigotti
Post by: Crist Rigotti on January 13, 2018, 07:26:16 PM
Hi Christ,
On your Thunderbolt profile it appears that you are using 4-40 bolts placed thru the front motor mount and into the Cobra motor. What are the bolts screwed into? It appears that the bolts are going directly into the motor.  Is this correct or am I missing something?

Thanks

Peter Mick

Pete,
Yes they go into the motor.  They are 3mm screws.  Don't get too long of screws because they'll hit the windings and ruin the motor.  I think I used 3 x 8MM screws.
Title: Re: Another question for Christ Rigotti
Post by: petermick on January 14, 2018, 10:25:22 AM
Thanks to both of you.  At least I was had the right idea.

Pete