stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: Mike Griffin on March 25, 2013, 01:58:41 PM
-
Andy just barely beat me getting his finished...LOL... here is mine.
By the way I made mine where you can disconnect the pushrod if you wish for putting in a carrying case. The coupling nut is attached to the short piece coming out of the wing with JB Weld. The long piece that runs from the coupling nut to the elevator horn is screwed in. Just disconnect the pushrod from the elevator horn and unscrew it from the coupling nut.
-
A couple of more pictures
-
Looks very good Mike, and for the rest of you Mike and I have shared information on this project through out the build cycle. Between the two of us we have managed to add a few gray hairs to Eric Rule's head. Mike I hope your Ringmaster flies great, I am looking forward to flying my new one soon.
Andy
-
Thank you Andy.. it has been fun.. I will give you a flight report...
Mike
-
Mike and Andy have certainly added a number of grey and white hairs to my head (LOL).
In all seriousness these two fellows have done an outstanding job with the test builds. Between them they have come up with a number of items that needed a closer look. If they had not double and triple checked the fit of the many parts and made numerous suggestions on improvements I am certain that the model would not be as good as it is. My heartfelt thanks and congratulations go out to them both!
Eric Rule
-
You are very welcome Eric. It was a labor of love and a lot of fun, even if I did chop up my hand.. LOL....was happy to to do it...
Mike