stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: James Mills on June 21, 2017, 04:52:09 PM

Title: Aluminum spinners
Post by: James Mills on June 21, 2017, 04:52:09 PM: I have a stash of Randy's spinners that I'd like to use on my electric set up. I'm using the Hyperion prod adapter (HP-ADAP-50XL) and the collett doesn't fit. What adapter do I need to make this work?

Thanks,

James
Title: Re: Aluminum spinners
Post by: Alan Resinger on June 21, 2017, 05:09:14 PM: James,
The shafts on the unit you have is more than likely metric. You will need to get someone to make your a long nut with the metric thread going in one side and the standard 1/4 - 28 on the other. Jim Lee could probably do it for you.
Alan
Title: Re: Aluminum spinners
Post by: Joe Yau on June 21, 2017, 05:47:34 PM: Quote from: James Mills on June 21, 2017, 04:52:09 PM
I have a stash of Randy's spinners that I'd like to use on my electric set up. I'm using the Hyperion prod adapter (HP-ADAP-50XL) and the collett doesn't fit. What adapter do I need to make this work?

Thanks,

James

Hi James.

I believe it has the M6 thread, which is the same as the AXI prop adapter for rear mount. Pat Mackenzie makes the M6 to 1/4-28 thread x1" adapters. I got a couple from him just recently and they're quite well made.

Infos are in the post below. (reply #9)

http://stunthanger.com/smf/gettin-all-amp'ed-up!/axi-question/ (http://stunthanger.com/smf/gettin-all-amp'ed-up!/axi-question/)
Title: Re: Aluminum spinners
Post by: Dennis Adamisin on June 22, 2017, 05:59:09 AM: Hi James

Brodak has an M8 to 1/4-28 adapter, #BH-1900
Title: Re: Aluminum spinners
Post by: James Mills on July 04, 2017, 05:20:37 PM: I spoke with Jim Lee and he made me 2 assemblies that work perfectly, I can't recommend his services enough. A BIG THANKS JIM.

Thanks,

James
Title: Re: Aluminum spinners
Post by: Randy Powell on July 05, 2017, 01:18:46 PM: Huh. I use an EFlite Power 32 motor with an ElectriFly collet adapter and a Randy spinner without issues.