Author Topic: 12x6EP vs 12x6E APC ??? (Read 1106 times)

Paul Taylor · « **on:** June 19, 2014, 09:01:25 PM »

Anyone know what the difference between these two props?

One is a E the other EP. Side by side i see no difference.

Thanks
Paul

Rick_Huff · « **Reply #1 on:** June 20, 2014, 05:26:31 AM »

Paul,
I'm pretty sure that the "EP" designates Electric, Pusher (cw rotation, when viewed from the front of the plane).
Rick

Dennis Adamisin · « **Reply #2 on:** June 20, 2014, 05:38:59 AM »

Hi Paul
First in big generalities: the "E" props are normal RH CCW rotation, the "EP" props are reverse/LH/CW/pusher rotation.

Assuming you are past that, the next thing is that there are at least 3 "generations" of the 12x6, there may be differences in the nomenclature molded into the blades. The latest pushers are marked "F2B".

John Cralley · « **Reply #3 on:** June 20, 2014, 09:58:08 AM »

Paul,

Back in the fifties in Army Basic training, if you could not tell your right hand from your left hand

, the drill Sgt. would make you carry a rock in your right hand!!! Do you think that would help you??

Just kidding.

Paul Taylor · « **Reply #4 on:** June 20, 2014, 01:20:02 PM »

Thanks guys. I will post some pics later.

Sent from my iPhone using Tapatalk

Paul Taylor · « **Reply #5 on:** June 20, 2014, 09:55:00 PM »

Well I did not read the package. Here ya go.

Sent from my iPhone using Tapatalk

Author Topic: 12x6EP vs 12x6E APC ??? (Read 1106 times)

Paul Taylor

12x6EP vs 12x6E APC ???

Rick_Huff

Re: 12x6EP vs 12x6E APC ???

Dennis Adamisin

Re: 12x6EP vs 12x6E APC ???

John Cralley

Re: 12x6EP vs 12x6E APC ???

Paul Taylor

Re: 12x6EP vs 12x6E APC ???

Paul Taylor

Re: 12x6EP vs 12x6E APC ???