stunthanger.com

Vendors Corner => Frank Bowman Rings => Topic started by: Frank Bowman on December 18, 2006, 08:45:05 AM

Title: Bowman's Rings Phone Number 505 327 0696
Post by: Frank Bowman on December 18, 2006, 08:45:05 AM
I make custom Piston Rings for 300 model engines for Glow, Diesel, & Gas, old to modern. I can make custom rings as well but will need your piston & liner or cylinder. Thanks & God Bless.



Bowman’s Rings  Phone Number 505 327 0696

Email: ringmaster46@msn.com

Reproduction Model Engine Rings


Quality at a fair honest price. Making a good ring is a Skill. Making a fine ring is an Art!


Last Revised 12 -18 - 06

I will reproduce nearly any model engine ring. If not available, I’ll need a good piston and cylinder to measure, or send motor. Send return postage, insurance is extra. Standard Production Ring price up to 1" bore, approximately .65 size $11.00 shipped for 1, and $19.50 for 2 shipped in US. Dykes rings up to 1" bore is $12.00 shipped for 1 and $21.50 for 2 shipped. From 1" to 2" bore standard ring is $12.00 shipped. Dykes from 1" to 2" is $13.00 shipped for 1 and $22.50 for 2 shipped. Foreign orders ask for shipping costs? Priority postage is extra. An order of 10rings or more, is $1.00 off each ring, mixed orders are fine!

** I also make special rings to order, ask for prices.**

Ace Twin .64

Aircom M61 (pin)

Anderson Spitfire .65

Air-O .45

Asp .52 4C, .61

Atomic

Atwood .49, .51, .63

Bat .19

Brison 2.4 (pin),3.2 (pin)

Brown Jr. .60 cylinder sizes vary (send Piston & cylinder for proper fit & correct ring)

Brownie .29

Bunch .45, .49

Cameron .15, .19

Cave Cobra .60

Cleveland Tom Thumb .45

Como .29 (pin), .40, .51 (pin), .90 (pin)

Contestor D.60

Cub Cadet 25CC (pin)

Dooling .29, .61, Yellow Jacket

Echo 16CC (pin), 21CC (pin), 23.6 (pin)

Edco Sky Devil .64 Old or New (RJL) state which one?

Enya 3.5 (pin), .35 X (pin), .40 X Dykes (pin), .40 Dykes model 6002, .45, .45SS (pin), .46 4C,.49 X, .53 4/C, .60 4C, .60 X (pin), .60 standard, .80 X (pin), .80 4C, .90 4C, 120 R 4C, 1.55 4C, 240 4C Twin

ETA .29

Forster .29, .31, .88, .99

Fox .40 Sch., .45, .50, .59 .047 thick ring only, .59 long shaft Ign., .60 Blue Head, .60 Eagle, Fox Hawk

Red Head .60 (pin), .74, .78

GMS .61 (pin), .76 Dykes (pin)

HB .21 Dykes, .40 PDP Dykes, .50 Dykes, .61 (pin), .61 Dykes

HP .40 (pin), .61 Standard, .61 Dykes (pin)

Hassad Blue Streak .64

Hiller (Car)

Homelite 25CC, 30CC (pin) old .060 thick (top to bottom measurement), 30CC newer .030 thick, 38CC (pin), 45CC (pin), 50CC (pin)

Hornet .19, .60

Howler .60 (pin)

Irvine .40 Pylon Dykes & Standard, .61 Dykes,.25 Dykes.

Kavan MK 50

KDC Kioritz 21.2 (pin), 23.6CC , 25CC (pin),30 CC (pin)

K&B .35 Dykes, .40Dykes, .40 S Dykes (pin), .61, .61 Dykes (Lee Custom), 1.5

Kraft .61 (pin)

Kratmo 10 CC

Magnum .53 XL 4C, .61 XL (pin), .91 XL 4C

Maloney 100 (pin), 125 (pin)

McCoy .09, .19, .19 Dykes B.H., .29, .29 Dykes B.H., .35 Dykes B.H., .36, .40 Dykes B.H., .49, .55, .60

McCulloch 21 CC, 28 CC

MDS .78 (pin),1.48 (pin)

Merco .40, .49, .49 Dykes, .50, .61, .61 Dykes

Moki M .51 (pin), .61 (pin), 1.35 (pin), 1.50 (pin), 1.80 (pin), 2.10 (pin)

O&R Industrial Motor 1 HP

OPS Maxi .30 (pin)

OS .20 FS 4C, .26 4C, .28 FH Dykes (pin), .32 (pin), .40 H Dykes & Standard, .40 H (P) Pylon, .40 FS 4C, .40 SR (pin), .807 bore, .40 FSR .835 Bore, .40SR Dykes, .45 (pin), .45 Dykes (pin),

.45 RSR Dykes, .46 Dykes (pin), .46FX (pin), .46SF (pin), .48 Surpass, Max .50 old, .50 FSR Dykes (pin),

.50 H (pin), .50 SX & SXH (pin), Surpass .52 4C, .58, Max-H .60 FGR .60 4C, .60FSR (pin) .9445 Bore - older or SF.9055 Bore, .61 FS 4C, .61 SX & SXH (pin), .65 (pin), .70 & .75 Surpass, .80 H,.80 Dykes (pin), .90 & .91 4C, .90 & .91 Glow, .91 FX (pin), .91 SX H (pin), 1.08 (pin), 120 4C, 160 FX (pin), BGX-1 3500 (pin)

Poulan 42C C (pin), 46 CC (pin), 60CC (pin)

Profi .40 (pin), .61 (pin), .76 (pin)

Quadra 50 (pin)

RSC 1.40 (pin)

Ross .60 Dykes (pin), .60 opposed twin Dykes (pin), .61 (pin)

Rossi .60 old, .60 (pin), .61 (pin), .65 (pin)

Ryobi 26 mm Bore EJ 100 (pin), 31CC (pin) older .064 thick, 31 CC (pin) newer .047 thick

Sachs 2.0 (pin)

Saito .40 4C, FA .45 4C, FA .50 4C, FA .60 T 4C Twin, FA .65 4C, FA .80, .91 4C, 120 4C,130 TD 4C Twin, 150 4C, 300 4C Twin

Scott Thunderbird

Skil chainsaw (pin)

Sky Chief .53

Spe 25.4 (pin), 40CC (pin),45CC (pin)

Stihl 25.4 (pin),Super 45 (pin)

Super Tigre .19, X.25, S .29 (pin), G21.29 old, .34 (pin), .40 Bullring, S.40 (pin), G21.40 std., G21.46 std.,

S.45 (pin), V.45, G21.40 wide dykes, G21 .46 wide Dykes, .46 Bullring, G.46, V.56, V.56 Dykes,

ALL .60's State which model you need.

V.60 wide & narrow Dykes, S.61 (pin), G.71, S.75 (pin), .90 (pin), 2000 (pin), 2300 (pin), 2500 (pin),

2600 (pin), 3000 (pin), 3250 (pin), 4500 (pin)

Syncro B-30, Syncro ACE, Syncro ACE Special

Tartan 1.34 (pin), Twin .77 (pin)

Technipower 7 Cylinder radial

Thunder Tiger .39 (pin), Pro .50 H (pin), .54 4C, .91 FS 4C, 120 Pro (pin)

Ueda .45, .61

Vlvatam 5CC

Veco .50 Dykes, .61, .61 Dykes

Vega 10CC

Webra 10 ccm, 6.5 (pin), .40, .40 (pin), .40 Dykes (pin), .50 Dykes (pin), .61, .61 (pin),

Speed .61 FS (pin), Speed .61 F Dykes (pin), T480 4C, .91 (pin), .120 Dykes (pin), T 4.90

Weedeater (pin) 1.380 Bore, 22 CC (pin)

Weedwacker 25CC? (pin)

Westbury Atom III

YS F.91 AC 4C, .91 2C (pin), F120 4C

YW 24CC single & 48CC Twin (pin)

Zenoah G20 Pin,G23 (pin), G 26 (pin), G38 (pin), G62 (pin)

 

 

Title: Re: Bowman's Rings
Post by: Phil Bare on January 12, 2007, 09:37:59 AM
Frank, I need rings for an Enya .45SS Or I should say, a ring....plus some other engines that I have will be needing them also.
I would like a phone number or email addy where I can reach you.
My phone number is: 336 657 2119 and my email is flbare@skybest.com
Please contact me with your contact info........Thanks, Phil
Title: Re: Bowman's Rings
Post by: Bob Zambelli on February 19, 2007, 10:02:39 AM
Hi, Frank - nice to see that you're really spooled up making the rings.

For anyone who is wondering, I have over 60 of Frank's rings and they all perform FLAWLESSLY.  ;D

I have compared them to factory rings and they seem to work better in every way.

I will be ordering many more in the near future.  #^ #^

Bob Z.
Title: Re: Bowman's Rings
Post by: Martin Quartim on April 26, 2007, 01:26:30 PM
Frank,

I need these rings. Please send me a total and I will pay up promplty.

1 Dykes Rings for Enya 40 6002
1 Ring for Enya 60 7033 with 1 ring
1 Set of Rings for Enya 60 7032 w/ 2 rings
1 Set of Ring (1 or 2 Rings?)  for OS Max 80H w/ 2 plugs
4 Rings for ST 46
4 Rings ST G51
6 Rings for ST 60  0.047
6 Rings for ST 60  0.044
4 Rings for Enya 45 6001
1 Ring Super Tigre 90K
2 Rings for Enya SS50
1 Ring for OS 40SF

If there is any questions about this engines please let me know.

Martin
Title: Re: Bowman's Rings
Post by: Frank Bowman on May 02, 2007, 06:22:33 AM
For the rings you have listed Martin, shipped Air Parcel Post to Brazil, $275. Thanks Frank
Frank,

I need these rings. Please send me a total and I will pay up promplty.

1 Dykes Rings for Enya 40 6002
1 Ring for Enya 60 7033 with 1 ring
1 Set of Rings for Enya 60 7032 w/ 2 rings
1 Set of Ring (1 or 2 Rings?)  for OS Max 80H w/ 2 plugs
4 Rings for ST 46
4 Rings ST G51
6 Rings for ST 60  0.047
6 Rings for ST 60  0.044
4 Rings for Enya 45 6001
1 Ring Super Tigre 90K
2 Rings for Enya SS50
1 Ring for OS 40SF

If there is any questions about this engines please let me know.

Martin
:)
Title: Re: Bowman's Rings
Post by: Martin Quartim on May 02, 2007, 03:13:14 PM
Hi Frank,

Do I need to check and adjust the ring gaps?

Cheers,

Martin

Title: Re: Bowman's Rings
Post by: Walter Hicks on April 27, 2008, 10:44:27 PM
Hi do you still have ST .60 rings available? Thanks W Hicks
Title: Re: Bowman's Rings
Post by: Frank Bowman on April 29, 2008, 06:38:47 AM
Hello Walter, I have all of the ST 60 rings, but will need to know for which model, etc. I have them for Small case V60, 4 types,G 60, X60, Blue Head 60. You can email me at: ringmaster46@msn.com Thanks Frank.
Hi do you still have ST .60 rings available? Thanks W Hicks
:)
Title: Re: Bowman's Rings
Post by: TIM MCGEE on December 05, 2012, 01:35:24 AM
how do I buy rings fot my dle 170 please call me Tim @ 280 683 3213
thank you
Title: Re: Bowman's Rings
Post by: Steve_Shipley on March 20, 2013, 12:43:44 PM
Hi Frank:
I would like to order some rings from you.  My email address is dshipley@windstream.net/
Thanks for replying.
Steve