stunthanger.com

Engine basics => Four strokes only => Topic started by: Gordon Tarbell on July 22, 2010, 09:20:49 PM

Title: Enya.40 4Sdiesel
Post by: Gordon Tarbell on July 22, 2010, 09:20:49 PM

Might be interesting for stunt. It will pull props 12 to 13" dia. and 6 to 8 pitch. not sure how hevy it is. Should be very stingy with fuel.

Title: Re: Enya.40 4Sdiesel
Post by: john e. holliday on July 23, 2010, 08:30:13 AM

A four stroke diesel, that I would like to see.  Do you have a picture? H^^

Title: Re: Enya.40 4Sdiesel
Post by: Don Curry AMA 267060 on July 23, 2010, 08:41:43 AM

Check your AMA magazine there is an article in the engine clinic about it.
Don

Title: Re: Enya.40 4Sdiesel
Post by: Jim Thomerson on July 23, 2010, 12:31:20 PM

Joe mentions that it has a metal plug in the glow plug hole which looks like a glow plug but is not.  I suppose one could use washers or a burned out glow plug to lower compression if desired. 

Title: Re: Enya.40 4Sdiesel
Post by: Gordon Tarbell on July 23, 2010, 07:57:07 PM

It arrives unassembled and with several head shims to adjust compression , mostly to compensate for weather conditions. Good article I thought.

Title: Re: Enya.40 4Sdiesel
Post by: john e. holliday on July 24, 2010, 08:40:23 AM

Pony Express hasn't made it down my road yet.  So I will wait for the magazine.   H^^