Electric Stunt > ESC Settings

Castle Creation Talon 25 - magnet on three wire input connector Why?

(1/1)

Dennis Toth:
I just purchased a new CC Talon 25. It has a donut shaped small magnet that the input cable is looped around. I have several Talon 35 ESC's and they don't have this. What is the purpose and do I need to route this wire away from anything in the setup?

Best,    DennisT

Dennis Toth:
OK, I call CC and they said it is to eliminate any radio interference, not a big deal on CL but does no harm and no special installation setup.

Best,   DennisT

Ken Culbertson:

--- Quote from: Dennis Toth on March 14, 2025, 01:07:55 PM ---OK, I call CC and they said it is to eliminate any radio interference, not a big deal on CL but does no harm and no special installation setup.

Best,   DennisT

--- End quote ---
I just take them off.  PIA to get into a cowl.  Have to spread out the wires then break them.

Ken

Fred Underwood:

--- Quote from: Ken Culbertson on March 14, 2025, 03:18:17 PM ---I just take them off.  PIA to get into a cowl.  Have to spread out the wires then break them.

Ken

--- End quote ---

Or cut the wire, remove the CC and solder wires to a more reasonable length, as they are generally long and just have to be tucked in somewhere.
Fred

Ken Culbertson:

--- Quote from: Fred Underwood on March 14, 2025, 03:53:26 PM ---Or cut the wire, remove the CC and solder wires to a more reasonable length, as they are generally long and just have to be tucked in somewhere.
Fred

--- End quote ---
Amen to that!

Navigation

[0] Message Index