stunthanger.com

Engine basics => Engine set up tips => Topic started by: Jim Nohsey on December 16, 2014, 03:40:11 AM

Title: Where to get engine parts??
Post by: Jim Nohsey on December 16, 2014, 03:40:11 AM

I'm looking for an venturi and nva for an o.s.max s35.

Also need a con rod for a st35.

Thanks for any help.

Title: Re: Where to get engine parts??
Post by: afml on December 16, 2014, 05:15:39 AM

Jim Lee  has the parts you are seeking for the OS 35.
Look in the Vendor's section and find Lee Machine Shop.
Inquire about the ST also.
Good luck & "Tight Lines!" H^^
Wes

Title: Re: Where to get engine parts??
Post by: John Craig on December 18, 2014, 06:41:18 AM

Randy Smith, Aero Products, may also be of help.

Title: Re: Where to get engine parts??
Post by: Steve Helmick on December 22, 2014, 08:38:56 PM

Brian Gardner from Australia has made ABC piston/cyl. sets for the OS .35S, and they come with a much improved conrod. Well received by users, too.

You might get lucky and find a NIP rod for the ST .35 from eBay or by advertising here in the Classifieds. One problem is that a lot of those OS .35S engines got ST .35C rods put into them...they fit, or can be made to fit. I forget which. Randy would know, and I'd sure recommend giving him a bell.  y1 Steve