stunthanger.com

Engine basics => Engine set up tips => Topic started by: Gordon Tarbell on December 23, 2006, 08:44:13 AM

Title: V case St 60's & 56
Post by: Gordon Tarbell on December 23, 2006, 08:44:13 AM
Are the piston and liners interchangeable on these. I have two 60's one with ears and one with out and a 56 no ears. Are the P&l the same between the two 60's and can I bore the 56 case to take 60 P&L sets? I have two Bristunt ABC P&L sets to use.
Title: Re: V case St 60's & 56
Post by: RandySmith on December 23, 2006, 03:39:51 PM
Are the piston and liners interchangeable on these. I have two 60's one with ears and one with out and a 56 no ears. Are the P&l the same between the two 60's and can I bore the 56 case to take 60 P&L sets? I have two Bristunt ABC P&L sets to use.

HI Gordon

There were so many differant pistons of varying features, pin placements ,ring types, etc.  and liners of differant thicknesses that you will most likely have to get a set of calipers and measure to know for sure

Regards
Randy