stunthanger.com

Engine basics => Engine set up tips => Topic started by: Leester on April 29, 2016, 09:27:32 AM

Title: Up right Fox 35 tank installation
Post by: Leester on April 29, 2016, 09:27:32 AM

I am building a Brodak Thunderbird with a L&J Fox 35. I am going to use a 4oz ATF Brodak tank BH-489. The pick-up tube is 1/16" higher than the NVA pick up (at the center of the tubes) is this going to be ok or do I need adjustments made ??

Thanks

Title: Re: Up right Fox 35 tank installation
Post by: Jim Kraft on April 29, 2016, 09:50:05 AM

I would put 1/16"s aluminum pads under the motor.