stunthanger.com

Engine basics => Engine set up tips => Topic started by: Lee Thiel on July 19, 2011, 05:25:29 PM

Title: Thunder Tiger 36 Question
Post by: Lee Thiel on July 19, 2011, 05:25:29 PM

I would like to know if the TT35 has the same mounting pattern as the TT40. Emailed TT, but no answer as of this time.
Thanks, Lee TGD

Title: Re: Thunder Tiger 36 Question
Post by: dennis lipsett on July 19, 2011, 06:21:46 PM

The TT36, 40GP and 40 Pro are interchangeable.
dennis

Title: Re: Thunder Tiger 36 Question
Post by: RandySmith on July 19, 2011, 07:25:48 PM

Quote from: Lee Thiel on July 19, 2011, 05:25:29 PM

I would like to know if the TT35 has the same mounting pattern as the TT40. Emailed TT, but no answer as of this time.
Thanks, Lee TGD

They do not share the same case, The mounts are close but they are not exactly the same

Randy

Title: Re: Thunder Tiger 36 Question
Post by: Lee Thiel on July 19, 2011, 09:11:13 PM

Bummer!
Thanks Randy and Dennis

Title: Re: Thunder Tiger 36 Question
Post by: Bob Reeves on July 20, 2011, 04:19:18 PM

A drillbit might solve the problem  VD~

Title: Re: Thunder Tiger 36 Question
Post by: Lee Thiel on July 20, 2011, 07:53:22 PM

Was thinkin the same thing Bob, or maybe a mill. y1
Lee TGD

Title: Re: Thunder Tiger 36 Question
Post by: RandySmith on July 20, 2011, 08:16:32 PM

Quote from: Lee Thiel on July 20, 2011, 07:53:22 PM

Was thinkin the same thing Bob, or maybe a mill. y1
Lee TGD

I would go for a small round file :-)

Randy