News:



  • June 21, 2025, 06:10:29 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: This is one of the sharpest looking engines I've ever seen  (Read 2499 times)

Offline Bob Zambelli

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 850
This is one of the sharpest looking engines I've ever seen
« on: April 30, 2007, 08:32:07 AM »
Going through some "stuff" this past weekend, I came across this.
Neat looking or what?

I think it's a Taifun Raisant or something like that.

Anyone know anything about it?

Also, check out my similar post in the OTS section.

Bob Z.
Logged

Offline rob biddle

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 230
Re: This is one of the sharpest looking engines I've ever seen
« Reply #1 on: May 02, 2007, 01:05:16 AM »
  Hey Bob where do you find these things?

 Wish I could get some more interesting engines in my collection! **)

 Cheers, Rob.
Logged
Robert Biddle

Offline Ralph Wenzel (d)

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 845
Re: This is one of the sharpest looking engines I've ever seen
« Reply #2 on: May 02, 2007, 06:50:22 AM »
Hey, Bob - -
Check your AHC ads circa '55 - '57. The Taifun was a regular listing back then, I think usually for around $9, back when $9 was 3-weeks allowance!!!
Logged
(Too many irons; not enough fire)

Ralph Wenzel
AMA 495785 League City, TX

Offline fred krueger

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 188
Re: This is one of the sharpest looking engines I've ever seen
« Reply #3 on: May 03, 2007, 08:24:50 AM »
I'm a bit of a Taifun nut, so I'll throw my 2 cents in.  Bob's engine picture is of a Taifun 'Blizzard'.  I posted a pic where the label is visible.  I also posted a pic of the Rassant 2 (the one with the 'tea-pot spout' venturi).  The colors on this Rassant are quite dramatic, so it is either NIB or refinished.  The Taifun colors tended to fade.

At present, I have a Hobby (1cc), 2 Hurrikans (1.5cc) and a Rassant 2 (2.5cc).  The Hurrikan and the Blizzard are reed-valve induction.
Logged

Offline Bob Zambelli

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 850
Re: This is one of the sharpest looking engines I've ever seen
« Reply #4 on: May 03, 2007, 09:43:13 AM »
Fred - you are correct on that call.

Last weekend, I sorted through around 300 engines, approximately 50 of which were C.I. (Diesels).
Things became a bit foggy after the first 200 or so!  n~ n~ n~

I do remember finding a number of Taifuns, one of which was the Raisant. I also found a new Hobby.

There were also some inline and opposed C.I twins, some of which I could not identify. Many water cooled.

If anyone is interested, I will post more pictures. If not, I won't bore anyone with this worthless  old stuff (!!!???!!!).   ;) ;) ;)

Bob Z.
Logged

Offline don Burke

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1027
Re: This is one of the sharpest looking engines I've ever seen
« Reply #5 on: May 03, 2007, 11:13:14 AM »
Definitely not worthless!  I'm always interested in this kind of stuff and I'm sure a lot of others are also.
Logged
don Burke AMA 843
Menifee, CA

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: This is one of the sharpest looking engines I've ever seen
« Reply #6 on: May 03, 2007, 11:24:54 AM »
Quote from: Bob Zambelli on May 03, 2007, 09:43:13 AM
Fred - you are correct on that call.

Last weekend, I sorted through around 300 engines, approximately 50 of which were C.I. (Diesels).
Things became a bit foggy after the first 200 or so!  n~ n~ n~

I do remember finding a number of Taifuns, one of which was the Raisant. I also found a new Hobby.

There were also some inline and opposed C.I twins, some of which I could not identify. Many water cooled.

If anyone is interested, I will post more pictures. If not, I won't bore anyone with this worthless  old stuff (!!!???!!!).   ;) ;) ;)

Bob Z.

HI BOB

Definitely post  the pictures, many people love seeing rare or unusual motors, and those that don't can skip over them  ;D

regards
Randy
Logged

Offline Bill Gruby

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1488
Re: This is one of the sharpest looking engines I've ever seen
« Reply #7 on: May 03, 2007, 11:32:47 AM »
Bob Z

    You know I can't get enough of your pictures, it gives me something to look forward to. Sometimes I have one sometimes I don"t. The "Yellow Jacket .61" was a prime example. That was a "RARE" find. Keep them comming please.

    "Billy G"   ;D
Logged
Bill Gruby
AMA 94433
MECA 5393-10

Offline Dennis Vander Kuur

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 215
Re: This is one of the sharpest looking engines I've ever seen
« Reply #8 on: May 03, 2007, 12:14:35 PM »
Definitely love looking at the beautiful old engines. Please keep the pictures and information coming!  #^
DennisV
Logged
Dennis L. Vander Kuur
AMA 29292

Offline roger gebhart

  • 2015
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 197
Re: This is one of the sharpest looking engines I've ever seen
« Reply #9 on: May 03, 2007, 04:04:18 PM »
Can't learn anything without more pictures. Keep em coming. We  love it.   rog   y1
Logged

Offline Jim Kraft

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3431
  • AMA78415
Re: This is one of the sharpest looking engines I've ever seen
« Reply #10 on: May 03, 2007, 09:52:53 PM »
I have a Taifun Tornado in my collection. The cyl. and spinner nut are anodized what looks to be a rasberry color. I have never run it, but it looks to be in fairly good shape.
Logged
Jim Kraft

Offline Bob Zambelli

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 850
Re: This is one of the sharpest looking engines I've ever seen
« Reply #11 on: May 04, 2007, 05:21:17 AM »
OK, guys - as promised, here are some more shots - all C.I.

I do not have a clue as to their identity.

The first two appear to be home made.

Well, anyone know them?

Bob Z.
Logged

Offline Bill Gruby

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1488
Re: This is one of the sharpest looking engines I've ever seen
« Reply #12 on: May 04, 2007, 05:48:29 AM »
BobZ.

  I could be wrong but the first one looks like a "SPEED DEMON DIESEL" .296 cu. in. circa 1947 by "Eastern Model Engineering-Long Island N.Y.

   "Billy G"   D>K
Logged
Bill Gruby
AMA 94433
MECA 5393-10

Offline Bob Zambelli

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 850
Re: This is one of the sharpest looking engines I've ever seen
« Reply #13 on: May 04, 2007, 06:32:39 AM »
Hi, Bill - you may be right on that call.  y1 y1

Just my guess but it appears to be larger than .296 C.I.D.
There is a three-digit serial number on the back but no other markings of any kind.

In fact, NONE of these last posted engines have any markings.  ??? ???

Bob Z.
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: