stunthanger.com
Engine basics => Engine set up tips => Topic started by: Larry Renger on November 28, 2018, 05:45:00 PM
-
Where should the tank centerline be relative to the thrust line of an OS 20 FP. I am running a uniflo tank with muffler pressure.
Thanks in advance for the information! H^^
-
Where should the tank centerline be relative to the thrust line of an OS 20 FP. I am running a uniflo tank with muffler pressure.
Thanks in advance for the information! H^^
Start right on the centerline to about 1/32 above. Adjust from there.
Brett
-
Great, thanks! I hoped you would see this post. H^^