stunthanger.com
Engine basics => Engine set up tips => Topic started by: Curtis Shipp on December 10, 2011, 04:42:16 PM
-
While going through my tigre 46's I found 1 engine that has no ring. Anybody know anything about this engine?
-
While going through my tigre 46's I found 1 engine that has no ring. Anybody know anything about this engine?
Is the sleeve brass?
-
Could it have been rebuilt with one of the Bristunt ABC P&L sets? 8)
-
Sleeve appears to be steel or cast iron. Piston looks chrome plated or aluminum. It is an older no lug case and the sleeve has no bridging for a ring. I may take it apart and get a better read on the parts. It is brand new or a very good rebuild but no name other then supertigre.
My bad it is a 35. I had it in my box of 46's and did not check the size. Still what is it. Is it any good for stunt. Like on a smoothie. Is it a combat engine. It looks just like a 46 except for no gap under the cylinder head.
-
If it is a 35 it would be a combat motor if there is no baffle on the piston, if there is a baffle it is a stunt motor. That is the G-21 35, there is also a plain bearing 35 that also has both flat top and baffled piston versions
Does it have G-21 on it or does it have a "C" on it?
Randy
-
The engine has a flat top piston, stunt venturi and g21-35. It has 1 exhaust port/no bridge and 2 intake ports/with bridge. It has no C anywhere but came with a very large short venturi.
-
It is a G21 35 combat motor
Randy
-
It is a G21 35 combat motor
Randy
....and it goes like hell!