stunthanger.com

Engine basics => Engine set up tips => Topic started by: taildragger-j3 on August 05, 2007, 09:17:47 AM

Title: Super Tigre 40 Venturi
Post by: taildragger-j3 on August 05, 2007, 09:17:47 AM

Does anyone know if the venturi for the ST .51 or .34 C/L engine will fit in the .40 R/C engine. I have a 40 I'd like to convert for C/L and was hoping one of the standard venturis would fit.

Title: Re: Super Tigre 40 Venturi
Post by: Andrew Hathaway on August 05, 2007, 11:42:06 AM

I'm sure someone will correct me if I'm wrong, but the G51 and G40 use the same carburator, so the venturi's should interchange.

Title: Re: Super Tigre 40 Venturi
Post by: Glen Wearden on August 05, 2007, 03:39:52 PM

I'm using a venturi in my G51 that I had in my GS40 before I converted it back to RC.  Same animal; not sure about the G34.  Glen

Title: Re: Super Tigre 40 Venturi
Post by: Joe Messinger on August 05, 2007, 04:06:01 PM

Even though Tower Hobby's "Tech Staff" says the ST .51 venturi won't work in a ST .40, they fit just fine.
Joe

Title: Re: Super Tigre 40 Venturi
Post by: taildragger-j3 on August 05, 2007, 04:35:05 PM

Y'all are too much. I knew I could get an answer here muy quick.

Thanks!!