Author Topic: Tall header on pipe setup. (Read 489 times)

Jerry Tarnofsky · « **on:** September 13, 2008, 02:56:47 PM »

Hi Guys,

Does having a 1.5" tall header vs the normal .5" hight make a any difference
when setting up the engine with the pipe chart?

Engine is a Ro-Jett 40.

Jerry

Jim Oliver · « **Reply #1 on:** September 13, 2008, 03:05:24 PM »

Jerry,

The convention for measuring the exhaust system is to measure from the glow plug to the first baffle in the pipe.
The measurement is taken along the path that the exhaust travels, so the "drop" should be included in the measurement.

Cheers,
Jim

Jerry Tarnofsky · « **Reply #2 on:** September 14, 2008, 08:44:13 AM »

Thanks for the info Jim.

Jerry

Author Topic: Tall header on pipe setup. (Read 489 times)

Jerry Tarnofsky

Tall header on pipe setup.

Jim Oliver

Re: Tall header on pipe setup.

Jerry Tarnofsky

Re: Tall header on pipe setup.