stunthanger.com

Engine basics => Engine set up tips => Topic started by: frank mccune on March 04, 2015, 04:10:30 PM

Title: SCREW WANTED
Post by: frank mccune on March 04, 2015, 04:10:30 PM

     Hi All:

     I need a backplate screw to fit a Magnum XL .15 engine.  This screw may be about 2.5 mm X 6mm.

     If you have one to spare, kindly contact me.

                                                                                 Thanks,

                                                                                 Frank McCune

Title: Re: SCREW WANTED
Post by: Steve Helmick on March 04, 2015, 04:36:26 PM

"Yeah, me too" was my first thought. But as for the metric socket head screws, your local Ace Hardware (assuming, since we have no idea where you live...you could fix that!) or local R/C car store will have what you want in the DuBro metric screw department. 

Title: Re: SCREW WANTED
Post by: frank mccune on March 05, 2015, 06:52:28 AM

     Hi Steve:

     Yes, I know that the subject title was a bit leading but I bet that it got a few looks! I had to draw attention to my post and what better way? Lol

                                                             Stay well my friend,

                                                             Frank McCune

Title: Re: SCREW WANTED
Post by: John Rist on March 05, 2015, 03:28:17 PM

I must be getting OLD. Right off thought you meant a machine screw.   n~