Author Topic: Restrictor to true venturi conversion (Read 918 times)

Paul Allen · « **on:** March 05, 2010, 01:15:11 AM »

Guy's
Does anyone have a conversion chart for true venturi sizes.
Example- 0.250" restrictor what size bore for a true venturi?
Thanks
Paul

Bob Reeves · « **Reply #1 on:** March 05, 2010, 03:43:38 AM »

Calculate the area minus the spraybar and you have it.

Bill Hummel · « **Reply #2 on:** March 05, 2010, 09:46:55 AM »

Paul, this is from a chart I've used over the years, based on a ST NVA (0.157 dia.)...hope this helps:

Venturi .126 = Restrictor .250
.148 = .270
.159 = .280
.170 = .290
.181 = .300
.192 = .310

Bill

BillLee · « **Reply #3 on:** March 05, 2010, 12:32:19 PM »

Try this:

http://www.nclra.org/Programs/Venturi.php

Bill Lee

Paul Allen · « **Reply #4 on:** March 09, 2010, 04:20:28 PM »

Thanks Bill, just what I was after.
Bob, will use your suggestion also.
Thanks
Paul

Author Topic: Restrictor to true venturi conversion (Read 918 times)

Paul Allen

Restrictor to true venturi conversion

Bob Reeves

Re: Restrictor to true venturi conversion

Bill Hummel

Re: Restrictor to true venturi conversion

BillLee

Re: Restrictor to true venturi conversion

Paul Allen

Re: Restrictor to true venturi conversion