stunthanger.com

Engine basics => Engine set up tips => Topic started by: Bill Calandrella on June 11, 2015, 09:09:51 AM

Title: Replacement for a Fox 59 needle valve assembly
Post by: Bill Calandrella on June 11, 2015, 09:09:51 AM

I would like to know what needle valve would be the best replacement for the OEM needle and spray bar on a Fox 59 (short shaft).  The outside dimension of the venture is 5/8 of an inch.  I contacted Eric Rule and he suggested the ST setup for a Fox 35 replacement.  That is much to short.  I would appreciate your advice on this.

Bill

Title: Re: Replacement for a Fox 59 needle valve assembly
Post by: Robert Zambelli on June 11, 2015, 06:59:37 PM

Bill - you may be able to use the NVA from an ST 60.

  Bob Z.