stunthanger.com

Engine basics => Engine set up tips => Topic started by: Keith Polzin on February 18, 2008, 04:35:34 PM

Title: RE: NVA
Post by: Keith Polzin on February 18, 2008, 04:35:34 PM

 Will your NVA work in a "FOX36X" ?
 Keith

Title: Re: RE: NVA
Post by: RandySmith on February 18, 2008, 08:16:42 PM

Hi

I used  ST  ones in my old  FOX 36Xs  so if you are asking about the  PA  type  NVAs,   Yes they  will  work  very well

Randy

Title: Re: RE: NVA
Post by: Keith Polzin on February 19, 2008, 09:37:37 PM

  How to get a couple? 4 would do.

 Keith

Title: Re: RE: NVA
Post by: don Burke on February 22, 2008, 09:22:26 AM

Do you have to drill out the stack for your NVA on the FOX?

Title: Re: RE: NVA
Post by: RandySmith on February 22, 2008, 10:34:05 AM

Quote from: Keith Polzin on February 19, 2008, 09:37:37 PM

  How to get a couple? 4 would do.

 Keith

Hi Keith

my contact details are

Randy Smith
Aero Products
980 Winnbrook Drive
Dacula , Ga 30019  phone  678-407-9376    Fax  678-985-5085

Email Randyaero@msn.com


Regards
Randy

Title: Re: RE: NVA
Post by: RandySmith on February 22, 2008, 10:36:39 AM

Quote from: don Burke on February 22, 2008, 09:22:26 AM

Do you have to drill out the stack for your NVA on the FOX?

Hi Don

my NVAs  are .157 diameters this fits some FOX engines. This is the same as the ST nva  and the older  OS nvas
for the FOX 35 I have a special NVA that is the same smaller diameter  as the Stock FOX 35  approx .129

Regards
Randy