stunthanger.com
Engine basics => Engine set up tips => Topic started by: Terry Bolin on November 04, 2006, 05:32:55 PM
-
I am breaking down a OS40 SF for a good friend of mine and I am down to the crankcase and crankshaft. My question is : does the thrust washer just press of with a puller like it looks like. Looks to be a tapered seat. Has anyone been here before?
Thanks, Terry
Terrybolinracing@aol.com
-
The answer is yes. You can probably get a puller from Tower or maybe from a local friend. If not I think I have one you can borrow.
-
I am breaking down a OS40 SF for a good friend of mine and I am down to the crankcase and crankshaft. My question is : does the thrust washer just press of with a puller like it looks like. Looks to be a tapered seat. Has anyone been here before?
Thanks, Terry
Terrybolinracing@aol.com
Terry
It is a pressed fit , it has a tapered collet and drive washer, it presses on when you tighten the props and takes a puller to get it off.
OS MAX makes a puller for their engines and you can get them from tower, or you can use a small gear puller
Regards
Randy
-
Central Hobbies sells a puller, which is actually a slightly modified battery terminal puller, for about $10.
Jim Oliver