News:


  • April 24, 2024, 04:43:26 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: OS Max-1 .35  (Read 2133 times)

Offline James Holford

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1515
OS Max-1 .35
« on: March 21, 2019, 03:58:26 AM »
Pulled this motor out of a Nobler I picked up last weekend that seen better days.

 Upon pulling the motor out I noticed it to be in rather good condition with excellent compression and just a odd NVA that Ive never seen first hand.

 My question is how good are these motors? Any good for stunt?
Any value?

 I have my share of .35 size motors and dont really need another I know Ill probably never use so Im at a standstill of putting it for sale, trading it away, or hanging on to it cause it may be the holy grail of stunt motors lol.



Sent from my SM-G965U using Tapatalk

Logged
Jamie Holford
Baton Rouge Bi-Liners
Lafayette, La
AMA #1126767

Offline Bootlegger

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2710
Re: OS Max-1 .35
« Reply #1 on: March 21, 2019, 08:48:52 AM »

  Jim, I sent you a P/M..Gil
Logged
8th Air Force Veteran
Gil Causey
AMA# 6964

Offline EddyR

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2561
Re: OS Max-1 .35
« Reply #2 on: March 21, 2019, 08:56:06 AM »
  Before stunt flyers  went to larger motors this was the considered the best stunt motor for the event. Many said better that the Fox .35. It is perfect for a vintage 35 size  plane. That is a correct needle valve for the motor. This motor in a G Nobler could be flown at the highest level in the right flyers hands. y1
Ed
Logged
Locust NC 40 miles from the Huntersville field

Offline James Holford

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1515
Re: OS Max-1 .35
« Reply #3 on: March 21, 2019, 10:04:57 AM »
Quote from: EddyR on March 21, 2019, 08:56:06 AM
  Before stunt flyers  went to larger motors this was the considered the best stunt motor for the event. Many said better that the Fox .35. It is perfect for a vintage 35 size  plane. That is a correct needle valve for the motor. This motor in a G Nobler could be flown at the highest level in the right flyers hands. y1
Ed
Sp yer saying even better than the Max-S?

Sent from my SM-G965U using Tapatalk

Logged
Jamie Holford
Baton Rouge Bi-Liners
Lafayette, La
AMA #1126767

Offline Clint Ormosen

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2628
Re: OS Max-1 .35
« Reply #4 on: March 21, 2019, 07:35:27 PM »
Quote from: James Holford on March 21, 2019, 10:04:57 AM
Sp yer saying even better than the Max-S?

Sent from my SM-G965U using Tapatalk

Depends on your definition of better. The Max I is more powerful than the S version, but I think you get a smoother, more stunt friendly run from the S. The Max I breaks hard and when it does, it's a rocket.
Logged
-Clint-

AMA 559593
Finding new and innovated ways to screw up the pattern since 1993

Offline EddyR

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2561
Re: OS Max-1 .35
« Reply #5 on: March 22, 2019, 06:26:14 PM »
 Let me give a little history on the Max1. Most people are not aware of this motor as it was not imported in huge numbers as the later OS motors. These motors were used for FF and combat for many years as the break was hard as mentioned above. I had three of them and used them in very large Class C FF. I ran crankcase pressure and 11/4 props at 15,000 rpm. They came with different size venture inserts.  In the late 1960 I started to fly a lot of larger stunt models and my Fox 35 didn't do well. I tried the Max 1 with a 10/6 prop and a home made venture insert at around .272-.280. This was good but to much speed so I put one of my old 11/4 FF props on it and I was in stunt heaven.  Now this was before we were into low pitch props to let the motor rev up. The Max1 is well built so it will run at higher RPM for stunt. I was running around 9200-10000 for stunt and no muffler. It was loud but I used it until the ST/40-46 came out. If you use a muffler use a tube type not a stub.
 At the time I did not realize that lower pitch props could make hot motors run in a stunt mode I just fell into it in this situation. ~^ ~^
Ed
Logged
Locust NC 40 miles from the Huntersville field

Offline James Holford

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1515
Re: OS Max-1 .35
« Reply #6 on: March 23, 2019, 07:26:27 AM »
Quote from: EddyR on March 22, 2019, 06:26:14 PM
Let me give a little history on the Max1. Most people are not aware of this motor as it was not imported in huge numbers as the later OS motors. These motors were used for FF and combat for many years as the break was hard as mentioned above. I had three of them and used them in very large Class C FF. I ran crankcase pressure and 11/4 props at 15,000 rpm. They came with different size venture inserts.  In the late 1960 I started to fly a lot of larger stunt models and my Fox 35 didn't do well. I tried the Max 1 with a 10/6 prop and a home made venture insert at around .272-.280. This was good but to much speed so I put one of my old 11/4 FF props on it and I was in stunt heaven.  Now this was before we were into low pitch props to let the motor rev up. The Max1 is well built so it will run at higher RPM for stunt. I was running around 9200-10000 for stunt and no muffler. It was loud but I used it until the ST/40-46 came out. If you use a muffler use a tube type not a stub.
 At the time I did not realize that lower pitch props could make hot motors run in a stunt mode I just fell into it in this situation. ~^ ~^
Ed
Thanks for the Info!

Sent from my SM-G965U using Tapatalk

Logged
Jamie Holford
Baton Rouge Bi-Liners
Lafayette, La
AMA #1126767

Online Dan McEntee

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6864
Re: OS Max-1 .35
« Reply #7 on: March 23, 2019, 10:00:07 PM »
   I have never seen a .35 -I. I have several .35III engines. Are they similar in any way? I even have a couple with a odd ball R/C carb. I have never run one, and one of these days will build  or buy a "mule" airplane that I can change out engines on easily to test with.   
   Type at you later,
   Dan McEntee
 
Logged
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline Brian Hampton

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 578
Re: OS Max-1 .35
« Reply #8 on: March 24, 2019, 07:40:21 PM »
The 29/35 Max-I dates from 1954, the Max-II from 1957 and the Max-III from 1959. The Max-II's are odd though because, apart from the Max-II .15, neither the 29 or 35 have any -II on the case, just Max. Also there are two versions of the Max-II with the later one having a larger crankshaft and crankcase casting similar to the Max-III.

There are tests of the Max-I, -II and -III at http://sceptreflight.com/Model%20Engine%20Tests/Index.html where the -II test shows both versions of my engines.
Logged

Offline frank mccune

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1621
Re: OS Max-1 .35
« Reply #9 on: March 31, 2019, 12:26:36 PM »
       Hi James:

       I can not comment on an OS Max .35I, but I can speak about the OS Max .35 III.  This engine was a dream to use! Very easy to start and run with a lot pf power! It is one of those engines that I wish that I still owned!  Use it and enjoy it!

                                                                                                                                                           Good luck!
Logged

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: OS Max-1 .35
« Reply #10 on: April 01, 2019, 03:48:02 PM »
For Stunt  the  35-S  was by far the best  of them

Randy
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here