stunthanger.com

Engine basics => Engine set up tips => Topic started by: Steve Adams on February 12, 2006, 10:02:46 PM

Title: OS FP40
Post by: Steve Adams on February 12, 2006, 10:02:46 PM

Randy
Have a few engines I need stunt tuned, Fox 36RC, OSFP40 and 35.  Is there someone out there that does these.

Steven Adams

Title: Re: OS FP40
Post by: RandySmith on February 13, 2006, 11:21:54 AM

Hi Steve

Is the FOX a ball bearing model or a plain bushing type? Does it have a very shiney case?  You may want to try Lew Woolard for the FOX.
As far as the OS engines go, have they been run? You will get a much better job done if these have not been worn.

There are many people who work on the OS engines
Leonard Neuman
Tom Dixon
Art Adamision
And myself are just as few.

There is also a large amount of aftermarket pieces made for teh OS and FOX engines,  such as Needle Valve assmeblies, low restrictionTube muffler, tongue muffler, etc.

Randyaero@msn.com


Regards
Randy

Title: Re: OS FP40
Post by: Steve Adams on February 13, 2006, 06:52:11 PM

Hi Randy
The fox 36 is not the shiney case.  Its just a plain fox 36RC.  As for the OSFPs the 40 has 1 flight on it and was crashed.  still turns over fine, hasnt been run since.  The OSFP 35 has never been run.