stunthanger.com

Engine basics => Engine set up tips => Topic started by: Jay Wood on July 12, 2009, 02:38:57 PM

Title: OS 46LA-S Carb
Post by: Jay Wood on July 12, 2009, 02:38:57 PM

I was wondering if anybody knows if the venturi carb on the OS .46 LA-S will fit the OS .46AX. I have a AX I'd like to convert to CL. I've contacted OS tech support today(Sunday) and probably will get a response sometime this week but I thought I'd ask you folks first.

Thanks

Jay

Title: Re: OS 46LA-S Carb
Post by: phil c on July 12, 2009, 04:46:11 PM

The AX uses a large, two needle carb.  The LA uses a much smaller, airbleed carb.  I'd be amazed if the two interchange.  The AX carb mount is at least 2mm larger than the LA.

Title: Re: OS 46LA-S Carb
Post by: Jay Wood on July 12, 2009, 05:40:42 PM

Thanks Phil,

I guess the AX is headed for eBay


Jay

Title: Re: OS 46LA-S Carb
Post by: john e. holliday on July 13, 2009, 08:26:32 AM

Contact Jim Lee at Lees Machine here in the vendors corner.  Or any of the fine vendors we have on this site.  DOC Holliday

Title: Re: OS 46LA-S Carb
Post by: Jay Wood on July 13, 2009, 03:19:44 PM

Thanks for the referal John. Jim had a affordable solution in about 5 minutes.


Jay