stunthanger.com
Engine basics => Engine set up tips => Topic started by: Richard Lotspeich on May 27, 2018, 06:25:07 PM
-
Hi Randy
i have an OS 32 that I used to run with a tuned pipe many years ago. I don't have the same pipe setup anymore, I wanted to try and pipe it again, but don't know where to start as far as length of pipe. Can you give me a starting point?
Thanks
Dick Lotseich
-
Hi Randy
i have an OS 32 that I used to run with a tuned pipe many years ago. I don't have the same pipe setup anymore, I wanted to try and pipe it again, but don't know where to start as far as length of pipe. Can you give me a starting point?
Thanks
Dick Lotseich
What prop are you going to use? most use a 11 x 4 or 10.5 x 4 , If your using that setup you would start at about 17.5 nches from plug to first baffle. Then you can give me RPM info and how it acts n the maneuvers
Randy
-
https://stunthanger.com/smf/engine-set-up-tips/pipe-chart-list-setup/
-
Thanks Randy
That is what I wanted to know. i will try it.
Dick
-
Randy, Would an 11x4 prop be good on an O S 32 without a pipe also, or does it need the pipe?
-
Randy, Would an 11x4 prop be good on an O S 32 without a pipe also, or does it need the pipe?
Yes the 11 x 4 is good for many stuntships running that motor
Randy
-
Randy, thanks, Gil..