stunthanger.com

Engine basics => Engine set up tips => Topic started by: rich gorrill on February 04, 2015, 04:18:05 AM

Title: Older Max-S question
Post by: rich gorrill on February 04, 2015, 04:18:05 AM

Quick question about Max=S 35 with a carb. Will the newer venturi's for the L.A. and F.P. fit to convert to control line. Also will the newer needle's work.

T.I.A.

Rich

Title: Re: Older Max-S question
Post by: Bill Little on February 04, 2015, 09:33:33 AM

Hi Rich,

No, you will have to get one made for the "S".  The newer NVA also has a smaller OD.  Several sources for a venturi, check the Vendor's Corner.  I know Randy Smith and Jim Lee both supply then.

BIG Bear
RNMM/AMM

Title: Re: Older Max-S question
Post by: rich gorrill on February 04, 2015, 04:03:29 PM

Thanks Bill

Title: Re: Older Max-S question
Post by: M Spencer on February 04, 2015, 09:31:44 PM

The Olde OS max 20 & 25 venturie fit , they ( sometimes ) came with THREE . Bigger ones just smaller than std. .35 sucker .

SEARCH here gets a bit of info on prefered sizes .
a nice long nylon ones likely to run more even .