stunthanger.com

Engine basics => Engine set up tips => Topic started by: Ty Marcucci on December 16, 2007, 01:32:53 PM

Title: New Fox .60 stunt engine
Post by: Ty Marcucci on December 16, 2007, 01:32:53 PM

 H^^

Title: Re: New Fox .60 stunt engine
Post by: mike mullis on December 16, 2007, 03:05:26 PM

there is or was one on ebay.....buy it now for 260.00  i think............

Title: Re: New Fox .60 stunt engine
Post by: Jim Oliver on December 16, 2007, 03:35:39 PM

Ty,
I just posted weight and measurements of the Fox Stunt 60 on the Brotherhood of the Ring site.
 www.brotherhoodofthering.info/flightline/forums/thread-view.asp?tid=765&posts=19&start=1

Scroll down the page a bit for the info.
Jim

Title: Re: New Fox .60 stunt engine
Post by: Gordon Tarbell on December 16, 2007, 07:50:31 PM

Couldn't access the site . I am not worthy.

Title: Re: New Fox .60 stunt engine
Post by: RandySmith on December 16, 2007, 08:36:36 PM

Quote from: Ty Marcucci on December 16, 2007, 01:32:53 PM

Anyone seen or tried the new Fox .60 CL engine?  Or is it too new?  A new, made in the USA, H^^ stunt engine! wow y1

Hello TY

I have, I have the FOX 60  in stock
I also have the new FOX 35 Plasma  engines in stock also

Randy

Title: Re: New Fox .60 stunt engine
Post by: Jim Oliver on December 16, 2007, 08:39:19 PM

The short version:

Weight of engine------------------------------------------------------12.75 oz.
Weight of muffler-------------------------------------------------------2.75 oz.
Width of case below mounting lugs--------------------------------------1.558
Width of lugs-----------------------------------------------------------2.278
Width between mounting holes, center to center-------------------------1.945
Distance between mounting holes, front to back, center to center---------0.995
over all length from back of engine to face of prop drive washer-----------3.60
Length of prop shaft----------------------------------------------------0.895
Shaft size-------------------------------------------------------------5/16 x 24
Height of engine, to top of fins------------------------------------------3.842

Baffle aluminum piston, no ring
Rod bushed at crankpin with oil slot, don't know about wrist pin end
Head button with deep hemi configuration

Jim

Title: Re: New Fox .60 stunt engine
Post by: mike mullis on December 18, 2007, 06:50:33 AM

randy..whats the price of the fox .60?????

Title: Re: New Fox .60 stunt engine
Post by: Alan Hahn on December 18, 2007, 07:58:45 AM

You can check out the Fox site on that.
http://www.foxmanufacturing.com/

Title: Re: New Fox .60 stunt engine
Post by: RandySmith on January 09, 2008, 11:47:54 AM

Quote from: mike mullis on December 18, 2007, 06:50:33 AM

randy..whats the price of the fox .60?????

Hello Mike

I sell them for  $249.00

Regards
Randy