stunthanger.com
Engine basics => Engine set up tips => Topic started by: David Ruff on January 21, 2018, 01:26:42 PM
-
I have a brand new Enya SS30 EX and I cannot get this thing to run.
Had it on the bench for hours. Nothing but a sputter for a few seconds.
I just started and ran a 1952 Fox 29 Stunt that was never run before. Seems that I can get that one to run just great. It is bone stock.
But an Enya. No luck.
Ready to send it back.
-
David ,
I have two of these and never had an issue. First check the needle valve for a blockage .
Enya’s don’t like too much oil 11/11/10 works well on mine .
Just about any hot plug will work for break in.
Hope this helps .
Brad
-
My Enya SS30 did not like running on my Fox mix with 25% castor. If I recall it liked FAI 80/20 and the Enya #3 glow plug.
John