![](https://i.ebayimg.com/images/g/8UoAAOSw0rdcDmRR/s-l300.jpg)
' We ' find , if you overdrill the bolt holes to 4 mm / - 5/32 inch ,
Then fit the bolts & angle them out ( or whatever ) & fore & aft , as its only 1/32 inch odd , we can perhaps avoid the pictured implement .
The ' Pre setting ' means the theads will engage without binding , raising burrs , so lessens thread & bolt stripping problems.
Im using 1/8 unf machine screws & nuts soldered to plates .
Continual forceing has the solder come free & twirly nuts .
![Angry >:(](https://stunthanger.com/smf/Smileys/classic/angry.gif)
resulting in big holes and charred edges when you resolder em .
Did I mention damp rags .
![Sad :(](https://stunthanger.com/smf/Smileys/classic/sad.gif)
With the 4-40 bolts and threads youd likely have no bother , as the tolerances are way outside what were at , but still drill oversize so theyre free to accomodate & pre align so nut & bolt are co - axial .
![Hoff H^^](https://stunthanger.com/smf/Smileys/classic/hatsoff.gif)