stunthanger.com
Engine basics => Engine set up tips => Topic started by: Bill Little on September 01, 2012, 03:47:56 PM
-
Venturi
Muffler
Prop
Fuel
glow plug
Thanks!
Bill
-
My guess is that is the auction engine, Congrats on the win. Here's my set-up, it's been posted before but here it is again, probably a good starting point. Small stock venturi, Big Art tube muffler, RSM 12x5.5 prop,Powermaster 10% R/C fuel w/ 1 ounce aero oil, Merlin 2005 plug. I also installed a ST-NV, probably not necessary but since I had one, went with it. Fuel is critical, it doesn't like a lot of castor. RSM 5.5 ounce uniflow tank (no muffler pressure). 8)
-
My guess is that is the auction engine, Congrats on the win. Here's my set-up, it's been posted before but here it is again, probably a good starting point. Small stock venturi, Big Art tube muffler, RSM 12x5.5 prop,Powermaster 10% R/C fuel w/ 1 ounce aero oil, Merlin 2005 plug. I also installed a ST-NV, probably not necessary but since I had one, went with it. Fuel is critical, it doesn't like a lot of castor. RSM 5.5 ounce uniflow tank (no muffler pressure). 8)
Hi Pete,
Yep I did get the "auction" engine from Sparky, thanks! Since I now have one, I am hoping to get those who have one chime in and we will "sticky" it to the top like the OS .46LA. It is a lot easier to look in one spot than trying to search all the entries that mention any part of "Evo .60". ;D
Bill
-
Hi, Bill, very similar set-up listed above. GREAT running stunt engine! Like the RSM prop with this engine, too!
-
As an alternative to the RSM prop, try a ZOAR 12x6. They work great! 8)