News:


  • March 28, 2024, 12:21:20 PM

Login with username, password and session length

Author Topic: ST NVA for Fox .35  (Read 2149 times)

Online Paul Taylor

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6042
  • If God is your Co-pilot - swap seats!
    • Our Local CL Web Page
ST NVA for Fox .35
« on: February 11, 2006, 08:40:43 PM »
Some one gave me a new ST NVA and on the bag it says for ST .51 or Fox .35.
I pulled my Fox NVA and installed the new ST NVA.

Problem:
ST NVA seems a little lose in the hole. And when I tighten the nut down I run out of threads and the NVA is not tight. Seems too long.

I put the Fox NVA back in. Last question. The Fox NVA has two holes in it. Do I point the hole up and down or point them front and back?

Thanks
Paul Taylor
Paul
AMA 842917

Tight Lines = Fun Times

Online Jim Kraft

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3411
  • AMA78415
Re: ST NVA for Fox .35
« Reply #1 on: February 11, 2006, 08:54:19 PM »
Hi Paul; The Super Tigre spray bars generally have a brass washer with them to take up the slack for Fox 35's. As far as the Fox spray bar, the holes go front and rear so that you can't see either on when looking down in the ventura.
Jim Kraft

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: ST NVA for Fox .35
« Reply #2 on: February 11, 2006, 11:38:48 PM »
Hi Paul

It  also sounds   like  you have  a  40  size ST NVA  instead  of the  bushing case 35 size.
There was  at least  3 sizes that ST  made  in that NVA
You can do as the previous  post said  and  use a washer as a shim

Randy


Advertise Here
Tags:
 


Advertise Here