News:



  • June 21, 2025, 12:21:34 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: LA46 drive washer, help  (Read 1205 times)

Offline Steve Agrella

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 54
    • Steve Agrella Photography
LA46 drive washer, help
« on: June 03, 2015, 09:07:23 PM »
I made a mistake and made my nose cowl too long dang it, I put the the spinner plate and prop on and crap its aprox .010 too long, the plane is finished, any suggestions to shim the drive washer.015 without having to sand the finish.
You guessed I'm a rank amateur, wanted a nice tight fit, got it too tight.
Logged

Offline dennis lipsett

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1718
Re: LA46 drive washer, help
« Reply #1 on: June 03, 2015, 10:00:52 PM »
Take a piece of course sandpaper and make a washer out of it. Placed on the shaft it should be thick enough to give you the clearance that you need . I've used this fix a few times over the years.

Dennis
Logged

Offline Chris Wilson

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1710
Re: LA46 drive washer, help
« Reply #2 on: June 04, 2015, 12:38:59 AM »
My personal preference would be for a D washer behind the prop driver - fiddly to make the centre cut out though.
Logged
MAAA AUS 73427

You have enemies? Good. That means you've stood up for something, sometime in your life.
 Nothing in life is so exhilarating as to be shot at without result.  It's not enough that we do our best; sometimes we have to do what's required

Offline Steve Agrella

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 54
    • Steve Agrella Photography
Re: LA46 drive washer, help
« Reply #3 on: June 04, 2015, 05:44:35 PM »
Quote from: Chris Wilson on June 04, 2015, 12:38:59 AM
My personal preference would be for a D washer behind the prop driver - fiddly to make the centre cut out though.
Worked like a charm, thanks very much
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: