stunthanger.com
Engine basics => Engine set up tips => Topic started by: James Holford on February 03, 2017, 02:29:05 PM
-
Wanting to change the Phillips bolts to Allan head. What the thread size?
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
8mm long for backplate, 12mm for head, and I think the muffler needs 18mm length, all 3m diameter x .5 pitch. You can probably get all these from the R/C car section at the LHS, or a good Ace Hardware store. H^^ Steve
-
Would backplate from a LA46 fit the LA40?
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Would backplate from a LA46 fit the LA40?
Sent from my SAMSUNG-SM-G891A using Tapatalk
yup
-
Sweet thx
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Jamie, you can probably find them at Hobby Towne, Baton Rouge. I converted some OS's and got some off their Sig/Dubro rack, but most I got from R/C car/heli dept his sons handle. They keep a lot of metric screw stuff.
Doug
-
Good deal!!!
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Jamie, I forgot to give you their PH#. (225)928-1534
Doug
-
Jamie, I forgot to give you their PH#. (225)928-1534
Doug
Awesome. Thanks!! I need to go back.. it's been a few weeks.
Sent from my SAMSUNG-SM-G891A using Tapatalk