stunthanger.com
Engine basics => Engine set up tips => Topic started by: Bootlegger on September 14, 2012, 11:15:30 AM
-
::) The size of the venturi in an O S L A 10, also what needle assy do y'all recommend?
Thanks y'all y1
-
Brother Gil,
Jim Lee: FP or LA
BIG Bear
RNMM/AMM
-
Thank ya' Bill will he have both parts? Again thnaks
-
Thank ya' Bill will he have both parts? Again thnaks
Hi Gil,
Like I have stated before the "original" NVA for the FP is basically unobtainable now. I never saw the LA in C/L form. If OS made a C/L version of the LA then the NVA should work on both.
I have FP and FSR .10s. They use the same NVA. I have found a few NVA over the past few years. Unfortunately the ones I have are in or slated for models.
And again, the "old" .10S venturi and NVA will not work.
BIG Bear
RNMM/AMM
-
I do have a FP.10 but I never ran it. It's been said to me that these needles are unobtainable. Why doesn't the Max-S needle and spraybar fit. Is the diameter too large? Is it too small? Why doesn't the FP, LA .15 needle fit. I don't know the answers here so I'm inquiring as well. If too large, could the larger be turned down? Ken
-
I do have a FP.10 but I never ran it. It's been said to me that these needles are unobtainable. Why doesn't the Max-S needle and spraybar fit. Is the diameter too large? Is it too small? Why doesn't the FP, LA .15 needle fit. I don't know the answers here so I'm inquiring as well. If too large, could the larger be turned down? Ken
HI Kenneth,
The .10"S" venturi and NVA are both too small to use in the FP.
BIG Bear
RNMM/AMM