stunthanger.com

Engine basics => Engine set up tips => Topic started by: frank mccune on July 05, 2013, 05:51:28 PM

Title: Help me identify a Fox ..35 Stunt
Post by: frank mccune on July 05, 2013, 05:51:28 PM

     Hi:

     I recently acquired a Fox Stunt that I need some help identifying.  It was given to this guy in 1968 as an anniversary model.  Perhaps the 20 anniversary model.

      It looks like the typical Fox stunt with a few exceptions.  One is the case has a somewhat textured outside finish.  The other thing is that the crank disk is much  thick and has a deep concave bevel pointing into the hole in the shaft. The hole in the shaft looks much larger than the standard Stunt.  The bore in the venturi also looks a bit larger. 

     This was a great running engine 30 years ago!

     Any idea as to what it is?

                                                                                                    Tia,

                                                                                                    Frank

Title: Re: Help me identify a Fox ..35 Stunt
Post by: 55chevr on July 05, 2013, 06:48:57 PM

Just a suggestion but a photo would be a real help in ID-ing your engine.


Joe

Title: Re: Help me identify a Fox ..35 Stunt
Post by: frank mccune on July 07, 2013, 07:15:21 AM

     Hi:

     I did some research and I think that this engine is a 1963 Anniversary engine.

                                                                          Frank