stunthanger.com

Engine basics => Engine set up tips => Topic started by: Akihiro Danjo on August 08, 2013, 06:27:03 AM

Title: Head gasket for OS 32F
Post by: Akihiro Danjo on August 08, 2013, 06:27:03 AM

I am looking for head shims for OS 32F. OS stock# 22914000 is not sold anymore.
Does anyone know a head shim that is suitable for OS 32F?

Aki

Title: Re: Head gasket for OS 32F
Post by: Bill Hummel on August 09, 2013, 09:55:16 AM

Aki, it's been quite a while, but I seem to recall we used Fox 35 head shims in the 32F. 

Title: Re: Head gasket for OS 32F
Post by: Dwayne on August 09, 2013, 10:52:24 AM

I used gaskets from a OS 35 AX

Title: Re: Head gasket for OS 32F
Post by: Akihiro Danjo on August 09, 2013, 10:21:29 PM

Thank you very much for the info, BH san and DD san.
I will order 35AX gasket because it is much cheaper and easier to get here in Japan than Fox.
I had not checked AX because current engines tend to have thicker wall cylinder and larger head.

Thanks again, Aki

Title: Re: Head gasket for OS 32F
Post by: Dwayne on August 10, 2013, 07:15:36 AM

Quote from: Akihiro Danjo on August 09, 2013, 10:21:29 PM

Thank you very much for the info, BH san and DD san.
I will order 35AX gasket because it is much cheaper and easier to get here in Japan than Fox.
I had not checked AX because current engines tend to have thicker wall cylinder and larger head.

Thanks again, Aki

Now that I think about it the AX is a bit wider but it does work no problems.