News:



  • June 23, 2025, 07:23:50 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Fox35 needle valve  (Read 1698 times)

Offline Bob Disharoon

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 448
Fox35 needle valve
« on: February 18, 2007, 03:11:33 PM »
What is the best replacement for the stock fox needle valve assembly..something that will bolt right on with no modification?..also, is such a modification REALLY needed for easier starting performance, etc.? thnx in advance, BOB ??? ???
Logged

Offline Leester

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2529
Re: Fox35 needle valve
« Reply #1 on: February 18, 2007, 03:22:56 PM »
I'm sure the moderator Randy Smith can set you right up. No guarentee you won't have to drill for proper size though.
Logged
Leester
ama 830538

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: Fox35 needle valve
« Reply #2 on: February 18, 2007, 10:13:04 PM »
Quote from: bob disharoon on February 18, 2007, 03:11:33 PM
What is the best replacement for the stock fox needle valve assembly..something that will bolt right on with no modification?..also, is such a modification REALLY needed for easier starting performance, etc.? thnx in advance, BOB ??? ???

HI Bob


The brand of NVA  will have no differance in teh way the motor  cranks ,but can have a huge differance in the running and the setting of the motor
The Best one in my opinion is the  PA style  Stainless  NVA, it is a bolt in direct replacement but is much finer , this makes it needle  much better ,

Regards

Randy Smith
Logged

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12668
  • Second in COMMAND
Re: Fox35 needle valve
« Reply #3 on: February 18, 2007, 10:43:34 PM »
I have used about every variation there is for Fox 35 NVAs.  ST, OS, Fox, and PA.  I will never buy another of any kind other than the PA again!  It fits perfect, and the collett nut locks with out having to use a wrench like on an ST.

Bill <><
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Bob Disharoon

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 448
Re: Fox35 needle valve
« Reply #4 on: February 19, 2007, 07:17:55 AM »
Thanks for the help..NOW then, how and where do I order one..BOB <= <=
Logged

Offline brucefinley

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 61
Re: Fox35 needle valve
« Reply #5 on: February 19, 2007, 10:31:49 AM »
From Randy Smith's PA Aero Products!  These are truly fine pieces.

Bruce
Logged

Offline Bob Disharoon

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 448
Re: Fox35 needle valve
« Reply #6 on: February 19, 2007, 04:06:19 PM »
I went to his site..nice stuff!..but could not find the pa nva after looking for 30 min...do you have the link handy?..thanx in advance..BOB H^^ H^^
Logged

Offline Leester

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2529
Re: Fox35 needle valve
« Reply #7 on: February 19, 2007, 04:32:21 PM »
Just give him a call 678-407-9376 or email.
Logged
Leester
ama 830538

Offline Dick Fowler

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 487
Re: Fox35 needle valve
« Reply #8 on: February 19, 2007, 05:53:24 PM »
I like the O.S.Max spraybar/needle valve assy. #22311000 . It is the same O.D. as the stock Fox spraybar ~ .134"  the ST spraybars are ~ .156" and choke down the cross sectional area.

Tower has them http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000443397&I=LXCR49&P=K


Logged
Dick Fowler AMA 144077
Kent, OH
Akron Circle Burners Inc. (Note!)
North Coast Control Liners Size 12 shoe  XXL Supporter

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: Fox35 needle valve
« Reply #9 on: February 19, 2007, 08:36:03 PM »
Quote from: Dick Fowler on February 19, 2007, 05:53:24 PM
I like the O.S.Max spraybar/needle valve assy. #22311000 . It is the same O.D. as the stock Fox spraybar ~ .134"  the ST spraybars are ~ .156" and choke down the cross sectional area.


Which is the  main reason I had the Stainless  PA  NVAs  made to fit perfect in both diameter and width , unlike the OS NVA these don't float around the hole because they are 1 1\16 of an inch too small at the case opening, and many times they will  leak

Regards
Randy
Logged

Offline Phil Bare

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 446
Re: Fox35 needle valve
« Reply #10 on: February 21, 2007, 05:48:46 PM »
Whats wrong with the Fox needle valve assembly?
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: