stunthanger.com

Engine basics => Engine set up tips => Topic started by: Robert Zambelli on July 05, 2015, 11:40:34 AM

Title: Fox 40th and 50th Anniversary info needed.
Post by: Robert Zambelli on July 05, 2015, 11:40:34 AM

Can anyone tell me if the muffler bolt spacing has changed between these two engines?

For that matter, has the fore and aft muffler bolt spacing changed on any of the Fox 35 engines?

  Thanks, Bob Z.

Title: Re: Fox 40th and 50th Anniversary info needed.
Post by: RandySmith on July 06, 2015, 01:03:57 PM

yes the bolt spacing changed by about .020 thou, 1.380  and 1.40   is what  i measured,  this will make  little  to no difference, as its only 10 thou  per side

Randy