stunthanger.com
Engine basics => Engine set up tips => Topic started by: Sport Pilot on October 10, 2014, 04:04:45 PM
-
Hello Gents H^^ H^^ H^^
An CL buddy wants to return to the hobby after a long time absence
He has an Fox 25 bushing that is with me for some cleaning and unlocking duties
The point is that this engine needs a new head, and I was thinking if maybe someone by here could have an destroyed engine with a in good shape head or used parts that could maybe be used in his Fox 25 (his 25 is the bushing main not the schneurle one)
If the head is available and will not be used anymore by one of you he will be very happy. An screw set for this engine will be very usefull too since the engine is without any of them and here, in Brazil screws with inches measurements are very hard to get
In the event of availability, please contact me so I can repass the costs and mail charges rates to my buddy
Many thanks by the help, and thanks a lot in advance to all
Carlo
-
Carlo,
It this 25 is the plain bushing with the bolt on venture I can probably help you with this. I also have screws for the engine and can supply original or the much better 3-48 socket head screws which will allow you to evenly tighten the head .
Dennis
-
Hi Dennis H^^ H^^ H^^
The engine is exactly the one that you said,
is the Fox 25 with bushing main and the bolt on venturi
Here we have an ilustrative image from the same engine type from web
Carlo
-
Hi Gents H^^
We just got a head for this engine, an second hand one in good shape
Thanks to all by the help
Soon this engine will be flying again !
Carlo