stunthanger.com

Engine basics => Engine set up tips => Topic started by: David Ruff on March 13, 2015, 02:54:09 AM

Title: Evolution 36 CL
Post by: David Ruff on March 13, 2015, 02:54:09 AM

I have two new Evo 36 CL engines with the remote NVA.

What do I need to convert to standard front NVA on the venturi?

Title: Re: Evolution 36 CL
Post by: RandySmith on March 13, 2015, 03:02:29 PM

Quote from: David Ruff on March 13, 2015, 02:54:09 AM

I have two new Evo 36 CL engines with the remote NVA.

What do I need to convert to standard front NVA on the venturi?

I have OS NVAs  that will thread into one side and make them front Needle, that works well, also Jim Lee makes adapters that hold a ST or PA NVA in the front hold down hole either works

Randy

Title: Re: Evolution 36 CL
Post by: David Ruff on March 14, 2015, 04:19:18 PM

Randy..which OS NVA do I need.  I will order..

Title: Re: Evolution 36 CL
Post by: RandySmith on March 14, 2015, 09:11:38 PM

Quote from: David Ruff on March 14, 2015, 04:19:18 PM

Randy..which OS NVA do I need.  I will order..

They are the 2a OR 3a RC needle assemblies, they just screw into the small EVO venturie

Randy

Title: Re: Evolution 36 CL
Post by: David Ruff on March 20, 2015, 04:21:52 PM

Randy..received the NVAs today.  Thanks.  Will let you know how it works.

Title: Re: Evolution 36 CL
Post by: Balsa Butcher on March 20, 2015, 04:31:34 PM

FWIW: If you haven't found out yet, Evo 36 (and 60s) don't like castor oil. Run it on regular R/C fuel or even full synthetic. For the 36, high rpm, low pitch is the way to go. Lots of power however don't expect a Fox 35 type run. 8)