stunthanger.com

Engine basics => Engine set up tips => Topic started by: James Holford on October 27, 2018, 06:53:10 AM

Title: Enya needle and OS nva
Post by: James Holford on October 27, 2018, 06:53:10 AM

Would a needle for an Enya .35 work on a NVA for OS .46LA?

Sent from my SAMSUNG-SM-G891A using Tapatalk

Title: Re: Enya needle and OS nva
Post by: RandySmith on October 27, 2018, 12:08:20 PM

Quote from: James Holford on October 27, 2018, 06:53:10 AM

Would a needle for an Enya .35 work on a NVA for OS .46LA?

Sent from my SAMSUNG-SM-G891A using Tapatalk

NO  not unless  you drill the case out to install the larger diameter  Enya spray bar,  then you will need to  open up the  Venturi .025 to .030  to make the  size the same

Randy

Title: Re: Enya needle and OS nva
Post by: Dane Martin on October 27, 2018, 05:42:02 PM

Jamie, you mean does just the needle thread into the valve body?  If so, then negative. The valve body threads are smaller on the OS.

Title: Re: Enya needle and OS nva
Post by: James Holford on October 27, 2018, 07:55:35 PM

Yea thats what i meant. My dad needs a spring needle and I have a few new enya needles and was curious if it would work.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Title: Re: Enya needle and OS nva
Post by: Dane Martin on October 27, 2018, 08:25:20 PM

Oh, I broke an os needle valve body, but I have the needle. I'll send it to you

Title: Re: Enya needle and OS nva
Post by: James Holford on October 27, 2018, 08:27:59 PM

Quote from: Dane Martin on October 27, 2018, 08:25:20 PM

Oh, I broke an os needle valve body, but I have the needle. I'll send it to you

Sweet!!!!

Sent from my SAMSUNG-SM-G891A using Tapatalk