stunthanger.com

Engine basics => Engine set up tips => Topic started by: Manuel Cortes on March 01, 2018, 10:20:18 AM

Title: Enya 60 XF - CX C´shaft compatibility question.
Post by: Manuel Cortes on March 01, 2018, 10:20:18 AM

Hi all.
I need to know if the crackcase of the Enya 60 XF is a replacement for the Enya 60 CX.

If some guy (Randy probably....) knows that I´ll agree the information.

Thanks in advance and Kind regards from Spain.

Manuel Cortés (PAMPA member again..... ~>)

Title: Re: Enya 60 XF - CX C´shaft compatibility question.
Post by: RandySmith on March 01, 2018, 03:33:36 PM

Quote from: Manuel Cortes on March 01, 2018, 10:20:18 AM

Hi all.
I need to know if the crackcase of the Enya 60 XF is a replacement for the Enya 60 CX.

If some guy (Randy probably....) knows that I´ll agree the information.

Thanks in advance and Kind regards from Spain.

Manuel Cortés (PAMPA member again..... ~>)

Hi Manuel
I do not have those 2 here  to measure, maybe someone  will and let you know

Randy

Title: Re: Enya 60 XF - CX C´shaft compatibility question.
Post by: Brian Hampton on March 01, 2018, 10:10:17 PM

I've just measured my 60X and 61CX with 60X measurement given first.
Distance between front/rear mounts 20/18mm.
Distance across mount hole centres 52/43
Crankcase width between bearers 43/34
Front mount hole to prop driver 57/53
Bare weight 16.5/12 ounces

Title: Re: Enya 60 XF - CX C´shaft compatibility question.
Post by: Istvan Travnik on March 02, 2018, 03:28:18 AM

bare weight difference 4.5 ounces...
We used to say this is good to kill a human...  :X

Title: Re: Enya 60 XF - CX C´shaft compatibility question.
Post by: Manuel Cortes on March 02, 2018, 11:07:18 AM

Hi.

Thanks for your responses. Is not really for me is for a friend....will keep waiting...

Kind regards.

Manuel.