stunthanger.com

Engine basics => Engine set up tips => Topic started by: rob biddle on October 04, 2011, 05:35:46 PM

Title: Enya 40xzs interchangeability?
Post by: rob biddle on October 04, 2011, 05:35:46 PM

  Hi Randy,
I was just wondering if the enya .40xzs was interchangeable with any other 35-40 size engines. In regards to shaft length, bolt pattern etc?

 Thanks in advance, Rob...

Title: Re: Enya 40xzs interchangeability?
Post by: Balsa Butcher on October 04, 2011, 06:55:11 PM

Well, I'm not Randy but I just checked and the 40 ZXS should be pretty much a straight drop in for the Aero-Tiger 36 which would also transfer to the TT 36 and Magnum engines. Length wise it is less than 1/64" longer than an Aero Tiger (2.88" vs 2.82" end of backplate to front of thrust washer) with identical mounting bolt pattern.  8)

Title: Re: Enya 40xzs interchangeability?
Post by: RandySmith on October 04, 2011, 07:10:43 PM

Hi all

Yes Pete is right  it will  fit where most of all the Heli based motors (28 to 39) fit. T Tiger , Magnum, Webra, OS etc.  it is also close to a FOX 35 that has a 1/2 inch prop shaft extention

Randy

Title: Re: Enya 40xzs interchangeability?
Post by: rob biddle on October 05, 2011, 12:57:21 AM

 Thanks guys,

Could be just the thing for a large or overweight fox powered model.

 Cheers, Rob...