stunthanger.com

Engine basics => Engine set up tips => Topic started by: James Holford on June 29, 2016, 05:18:23 PM

Title: Enya .15 III Venturi question
Post by: James Holford on June 29, 2016, 05:18:23 PM

I'm looking for a CL venturi for my Enya .15 IV.  I've been offered one but it's for the Enya .15 III..

 Would the Venturi for the Enya .15 III properly fit the IV?

Title: Re: Enya .15 III Venturi question
Post by: Dane Martin on June 29, 2016, 06:19:53 PM

Hi James!
Yes, they are indeed the same fit. Just like OS, there are different inner diameter venturi's available.

Title: Re:
Post by: James Holford on June 29, 2016, 06:43:09 PM

Sweet!!!!!!!!

 Gona put this on the Jr Lightning Streak... figure it won't be as much as a bat from hell like a Fox .19 I was gona put lol

Title: Re: Enya .15 III Venturi question
Post by: Bootlegger on June 29, 2016, 08:23:19 PM

 Jamie, I built a Jr Flite streak with an os 10 and it flies very well on 48' .012 lines using 7x4 and 7x5 apc props.
 
  If you get the chance come over here and I'll let you fly it..

Title: Re: Re: Enya .15 III Venturi question
Post by: James Holford on June 30, 2016, 04:14:41 AM

Quote from: Bootlegger on June 29, 2016, 08:23:19 PM

Jamie, I built a Jr Flite streak with an os 10 and it flies very well on 48' .012 lines using 7x4 and 7x5 apc props.
 
  If you get the chance come over here and I'll let you fly it..

Sounds good!

Title: Re: Enya .15 III Venturi question
Post by: Bill Johnson on June 30, 2016, 06:49:34 AM

I've bought several Enya 15 III and IV venturiis from Bobby Brooks off his Ebay store.

http://www.ebay.com/itm/ENYA-15-19-20-C-L-VENTURI-DELRIN-NIP-/222141945342?hash=item33b8b115fe

As you can see in the listing, he has 3 diameter venturiis. I'm using the 6MM and it works very well for stunt flying.