stunthanger.com
Engine basics => Engine set up tips => Topic started by: James Holford on June 29, 2016, 05:18:23 PM
-
I'm looking for a CL venturi for my Enya .15 IV. I've been offered one but it's for the Enya .15 III..
Would the Venturi for the Enya .15 III properly fit the IV?
-
Hi James!
Yes, they are indeed the same fit. Just like OS, there are different inner diameter venturi's available.
-
Sweet!!!!!!!!
Gona put this on the Jr Lightning Streak... figure it won't be as much as a bat from hell like a Fox .19 I was gona put lol
-
Jamie, I built a Jr Flite streak with an os 10 and it flies very well on 48' .012 lines using 7x4 and 7x5 apc props.
If you get the chance come over here and I'll let you fly it..
-
Jamie, I built a Jr Flite streak with an os 10 and it flies very well on 48' .012 lines using 7x4 and 7x5 apc props.
If you get the chance come over here and I'll let you fly it..
Sounds good!
-
I've bought several Enya 15 III and IV venturiis from Bobby Brooks off his Ebay store.
http://www.ebay.com/itm/ENYA-15-19-20-C-L-VENTURI-DELRIN-NIP-/222141945342?hash=item33b8b115fe
As you can see in the listing, he has 3 diameter venturiis. I'm using the 6MM and it works very well for stunt flying.