Author Topic: Enya needle and OS nva (Read 793 times)

James Holford · « **on:** October 27, 2018, 06:53:10 AM »

Would a needle for an Enya .35 work on a NVA for OS .46LA?

Sent from my SAMSUNG-SM-G891A using Tapatalk

RandySmith · « **Reply #1 on:** October 27, 2018, 12:08:20 PM »

Quote from: James Holford on October 27, 2018, 06:53:10 AM

Would a needle for an Enya .35 work on a NVA for OS .46LA?

Sent from my SAMSUNG-SM-G891A using Tapatalk

NO not unless you drill the case out to install the larger diameter Enya spray bar, then you will need to open up the Venturi .025 to .030 to make the size the same

Randy

Dane Martin · « **Reply #2 on:** October 27, 2018, 05:42:02 PM »

Jamie, you mean does just the needle thread into the valve body? If so, then negative. The valve body threads are smaller on the OS.

James Holford · « **Reply #3 on:** October 27, 2018, 07:55:35 PM »

Yea thats what i meant. My dad needs a spring needle and I have a few new enya needles and was curious if it would work.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Dane Martin · « **Reply #4 on:** October 27, 2018, 08:25:20 PM »

Oh, I broke an os needle valve body, but I have the needle. I'll send it to you

James Holford · « **Reply #5 on:** October 27, 2018, 08:27:59 PM »

Quote from: Dane Martin on October 27, 2018, 08:25:20 PM

Oh, I broke an os needle valve body, but I have the needle. I'll send it to you

Sweet!!!!

Sent from my SAMSUNG-SM-G891A using Tapatalk

Author Topic: Enya needle and OS nva (Read 793 times)

James Holford

Enya needle and OS nva

RandySmith

Re: Enya needle and OS nva

Dane Martin

Re: Enya needle and OS nva

James Holford

Re: Enya needle and OS nva

Dane Martin

Re: Enya needle and OS nva

James Holford

Re: Enya needle and OS nva